HomePortalGalleryFAQSearchRegisterLog in
Post new topic   Reply to topic
 equipment for a good breeding tankView previous topic View next topic Go down 
AuthorMessage
cyndrine
Rank2 Member
Rank2 Member


Gender:Female
Age : 36
Joined : 15 Feb 2008
Posts : 79
Location : calgary, alberta canada
Job/hobbies : fishkeeping, birds, cats, plants, rpg's, books, movies and a cashier to pay for it all
Favourite type of fish : ever changing can't stick to one favorite. if it swims and lives in water i love it

PostSubject: equipment for a good breeding tank   Sat Mar 22, 2008 10:11 pm

want to make sure i am doing this right. to much contradictory information on my internet searches.

I have just set up a 10 gal tank for my guppies. knowing guppies i am gonna have babies.
What is the proper type of filter to have in the tank to give the babies the best chance of surviving tell they are big enough to go into the bigger community tank?
current tank set up is 10 gal freshwater, airstone, whisper 60 filter on a low setting or the current is to high from it, 3 fake plants. tank is a little cloudy but will soon post a pic so you guys can see the setup inside.
Back to top Go down
Celticwraith
Admin
Admin


Gender:Male
Age : 40
Joined : 19 Jan 2008
Posts : 305
Location : Ontario, Canada
Job/hobbies : Keeping fish
Favourite type of fish : Kribensis

PostSubject: Re: equipment for a good breeding tank   Sun Mar 23, 2008 7:18 am

I have heard that a sponge filter is best in breeding tanks, but this may not be must. I had fish breeding in a 10 gallon and all I did was put a fine screen over the in take, to prevent the fry from getting sucked in to it.
I have also heard of people using a piece of pantie hose and doing the same thing.
_________________
Back to top Go down
Fish_Genius
Mentor
Mentor


Gender:Male
Joined : 02 Feb 2008
Posts : 168
Location : Burlington Ontario, Canada
Job/hobbies : Fishkeeping
Favourite type of fish : Altum Angelfish

PostSubject: Re: equipment for a good breeding tank   Mon Mar 24, 2008 9:05 am

Sponge filters are the best, as fry do not get sucked into it. Java moss and vallisneria are the best plants in my opinion for fry tanks, as the fry can hide in them easily. Regular water changes are important as fry need excellent water quality. As for gravel, no gravel is best, so leave the plants in plant baskets or aquarium planters. All of this has worked for me over the years with my discus and angels, along with many other freshwater cichlids, danios, catfish, tetras, plecos, livebearers, and many other fish.
_________________
I have been keeping aquariums most of my life. I have kept both fresh and salt water, cichlids, catfish, loaches, clownfish, wrasses, and everything in between. Feel free to ask me any questions!

Visit my forums at http://aquariumuniverse.one-forum.net
Back to top Go down
cyndrine
Rank2 Member
Rank2 Member


Gender:Female
Age : 36
Joined : 15 Feb 2008
Posts : 79
Location : calgary, alberta canada
Job/hobbies : fishkeeping, birds, cats, plants, rpg's, books, movies and a cashier to pay for it all
Favourite type of fish : ever changing can't stick to one favorite. if it swims and lives in water i love it

PostSubject: Re: equipment for a good breeding tank   Sun Mar 30, 2008 1:57 pm

picked up a sponge filter and have it int he tank. leaving the other filter on so the sponge can cycle in. still cloudy thou. been cycling with a water start from the other tank for i think 3 weeks. with the filter from the other tank and water from it it should it be taking this long to cycle on a 10 gal?
Back to top Go down
gumbii
Mentor
Mentor


Gender:Male
Age : 26
Joined : 01 Mar 2008
Posts : 115
Location : bell gardens, ca
Job/hobbies : technitian/breeder...
Favourite type of fish : ever-e-tang!...

PostSubject: Re: equipment for a good breeding tank   Sun Mar 30, 2008 7:43 pm

i always have sponge filters running in all my tanks... so when i need to bust out with an emergency 10g tank i have a seeded sponge filter for it...

another thing you could do is get alot of plants... guppies will eat thier fry... i used to use java fern and moss in my guppy tank... they hide in it, eat on the ditrees that get stuck in the moss, controll algae and doesn't need alot of light...

good luck...
Back to top Go down
cyndrine
Rank2 Member
Rank2 Member


Gender:Female
Age : 36
Joined : 15 Feb 2008
Posts : 79
Location : calgary, alberta canada
Job/hobbies : fishkeeping, birds, cats, plants, rpg's, books, movies and a cashier to pay for it all
Favourite type of fish : ever changing can't stick to one favorite. if it swims and lives in water i love it

PostSubject: Re: equipment for a good breeding tank   Wed Apr 09, 2008 1:29 pm

alrighty. took off the hob filter from the 10 gal and it cleared up within hrs. What ever tank i have this hob on goes cloudy. So I am thinking this is now a spare parts filter for me.
Back to top Go down
billchnc
Mentor
Mentor


Gender:Male
Age : 49
Joined : 14 Feb 2008
Posts : 130
Location : Montrose, PA, USA
Job/hobbies : builder/pisces/rockets
Favourite type of fish : Carassius auratus

PostSubject: HOB Whisper 60   Wed Apr 09, 2008 7:13 pm

You really don't want that hob filter on the breeder tank. It will suck up everything you're going for. The sponge is all you need with some carefull 25% water changes to reduce N... levels.

I have three Whisper 60, a Whisper 40 and three Whisper 20 filters running on various tanks. (All take same media stuff). Rarely ever see cloudy water.

Having town water I use water conditioners to neutralize Cl. The water conditioners I also refer to as "slime". The goldfish I have need it for stress reduction at water change time. Every goldfish grower I've seen recommends close to triple label rate for them using town water. "Slime" undoubtedly precipitate microparticles in the water, as well.

The common physical stuff that I look at for cloudy water is tank gravel finds (fine sand), plant material, the water source itself being cloudy with clay, and other pollutants from fish and every other thing that goes in the tank.
I really like having a new fresh water test kit with the tests for the various N.... levels and pH and hardness tests. (But it did cost $41.) It stops a bit of wondering.
I already know the water company is going to dump a lot of Cl in the water at their test time.

Anyhow, once you get the tank established, condition the proud parents with higher protien food and get them going. yeh.
I can tell you do have it under control.
They love it.
Back to top Go down
BettaGuppyBreeder
Rank2 Member
Rank2 Member


Gender:Male
Age : 28
Joined : 13 May 2008
Posts : 67
Location : Chatham, Ontario, Canada
Job/hobbies : Driver Dilivery
Favourite type of fish : Blood Parroits

PostSubject: Re: equipment for a good breeding tank   Mon May 19, 2008 1:43 pm

I use Pen-Plax Filters and Fluval 1 with pantie hose around it. I breed Fancy Guppies that i plan on entering for compitions. I do daily 5% water changes and keep the currents low by blocking them.. The baby fry get tired and lose energy that they need for growing. i also feed them just hatched brine shrimp too. Oh ya no gravel and i use the smallest clay pots for hides.
Back to top Go down
equipment for a good breeding tankView previous topic View next topic Back to top 
Page 1 of 1

Permissions of this forum:You cannot reply to topics in this forum
Celticwraiths Aquarium Forum :: Fresh Water Fish & Tanks :: Freshwater fish basics-
Post new topic   Reply to topic